500+ SKUs

MOQ from 100 pcs

7-day sampling

Leave Your Message
*Name Cannot be empty!
* Enter product details such as size, color,materials etc. and other specific requirements to receive an accurate quote. Cannot be empty

News

Wholesale Camping Hammocks: Materials, MOQ and Bulk Pricing Explained

2026-10-23
Two-person camping hammock with full enclosing mosquito net

Outdoor Products · Wholesale Sourcing

Wholesale Camping Hammocks: Materials, MOQ and Bulk Pricing Explained

Published wholesale terms for camping hammocks: MOQ 500 pieces, monthly capacity 10,000 pieces, 7-day sampling, 30-day production. This article explains what those numbers do and do not tell a buyer.

The reference product: a two-person hammock with a fully enclosing mosquito net, supplied with Tree Straps, a quick attachment buckle, and a storage bag.

TL;DR — The Short Answer

  1. Published MOQ is 500 pieces, but the question that matters is whether that is per order or per colour and size. Three colours at 500 each is 1,500 pieces, not 500. This is the single most misunderstood number in the quotation.
  2. The 30-day production time does not start at order placement. It is explicitly conditional on the customised sample already being confirmed, and sampling runs 7 days after details are confirmed — so the realistic schedule is materially longer than 37 days.
  3. Specify fabric by denier and weave, not by fibre type. A hammock described only as nylon cannot be compared against another quotation, because denier determines strength, pack weight, and price together.
  4. The 500-pound figure is a weight recommendation, not a certified load rating. Only the second answers a safety question that retailers increasingly ask.
  5. Capacity is not your constraint. At 10,000 pieces per month published supply ability, a 500-piece order uses five percent of one month. Colour count and sample approval are what actually slow you down.

The Terms

The published terms and what each one actually commits to

Starting with the numbers, because they are the starting point and because reading them correctly saves most of the conversation later.

Published term Value What it actually commits to
Minimum order quantity 500 pieces A minimum that may apply per order or per colour and size; the published text does not say which
Supply ability 10,000 pieces per month Monthly output capacity, which is not the same as lead time on your order
Sample time 7 days after details confirmed Manufacturing time for the sample, excluding your review and any revision cycle
Delivery time 30 days after prepayment, based on the customised sample being confirmed Production time only; the sample cycle sits outside this figure
Seating capacity 2.0 persons Intended use, not a load specification
Maximum weight recommendation 500 pounds A manufacturer recommendation rather than a stated certified load rating
Customisation Colour, size, pattern, logo, accessory The scope of what can be changed, which interacts directly with the minimum order quantity
Shipping port Ningbo or Shanghai Port options, both of which are major container export points

Three rows in that table are routinely misread, and each misreading costs money.

The minimum order quantity is the one that is not your minimum. The published figure is 500 pieces. What the published text does not say is whether that applies across the whole order or separately to each colour and size. This matters more than it sounds, because custom colour is published as available and is the normal reason a private-label buyer orders a hammock. A buyer intending three colours at 500 pieces each is ordering 1,500 pieces. A buyer intending three colours sharing a 500-piece order is asking for roughly 167 pieces per colour, which is a different production run and often a different price basis.

CAUTION: Ask in writing whether the 500-piece minimum applies across the whole order or separately to each colour and size. This is the single number most often misunderstood at the quotation stage, and it can change your order size by a factor of three.

The second question in the same area is whether an approved design carries the same minimum on a repeat order. If it does, your first order size is a one-off decision. If a repeat order of an unchanged approved design qualifies for a lower minimum, it is a standing constraint, and that is worth knowing before you plan your range.

The delivery time is not a schedule. The published wording is specific: 30 days after prepayment received, based on the customised sample being confirmed. That condition is doing real work. Sampling is published at 7 days after details are confirmed. Between those two figures sit the steps nobody quotes: finalising your specification, the supplier producing the sample, shipping it to you, your review, your approval or revision, and any second sample cycle. Add international shipping in both directions, and the realistic total from first enquiry to goods in your warehouse is comfortably double the sum of the two published numbers.

The 30 days is production time and it starts only after sample confirmation. The realistic schedule from first enquiry to delivered goods is comfortably more than 37 days.

This is not a criticism of the published figure, which is honest about its own scope. It is a warning about planning against it. If your buying season is fixed, the sample cycle is the critical path and it is the part most likely to slip, because it depends on your review time rather than on the factory's schedule.

Capacity is the number that does not constrain you. Published supply ability is 10,000 pieces per month. A 500-piece order consumes five percent of one month's output. It is worth naming this because buyers often screen suppliers on capacity and worry unnecessarily. At the order sizes this category typically runs, capacity is not the constraint. The constraints are colour count, sample approval, and where the order sits relative to your selling season — none of which appear in a capacity figure.

Materials

Materials: why denier matters more than fibre type

Most hammock specifications describe the material by fibre type, and a specification that says only "nylon" or only "polyester" is close to useless for comparison.

What actually determines how a hammock performs is denier — the weight in grams per 9,000 metres of fibre — combined with the weave. Together those two set tensile strength, pack weight, and price, and all three move together. A heavier fabric is stronger and bulkier; a lighter fabric packs smaller and fails earlier.

A hammock described only as nylon cannot be compared against another quotation, because denier and weave determine strength, pack weight, and price simultaneously.

The practical consequence is that two quotations can both say "nylon hammock" and differ by a wide margin without either supplier being wrong. One is quoting a lightweight fabric for backpacking and the other a heavier fabric for durability, and the buyer has no way to tell from the description.

The questions to ask about fabric. Require the answer in a form you can compare. What denier is the body fabric, and what is the weave. What denier is the mosquito net, which is usually lighter than the body and is the component that tears first. Is any coating applied, and if so whether it is polyurethane, silicone, or acrylic, since each behaves differently against moisture and abrasion.

Then ask about the two properties that determine whether the hammock survives its first season. What is the stated tensile or breaking strength of the body fabric and the webbing, and is there a seam strength figure, because a hammock with a strong fabric and a weak seam fails at the seam.

Finally, ask about the finish. A hammock for a damp climate and one for a dry climate should not necessarily have the same coating, and a supplier who asks which market the product is for before recommending a fabric is giving you a better answer than one who quotes a single specification for everywhere.

The weight recommendation is not a load rating. The published maximum weight recommendation is 500 pounds. The wording matters: it is published as a recommendation. A recommendation and a certified load rating are different claims. A recommendation is what the manufacturer believes the product will take. A load rating is a figure established by testing to a stated method. Only the second answers a safety question, and retailers are increasingly asking which one applies.

CAUTION: The published 500-pound figure is a recommendation, not a certified load rating. If a retailer asks whether the claim has been tested, ask the supplier whether load testing was performed and to which standard before answering.

The suspension is where the real strength limit usually sits anyway. A hammock body and a set of tree straps carry the same load, and the straps are frequently the least-specified component on the product. Their webbing specification, their width, and whether they include adjustable tree loops are all worth confirming.

Construction

Construction: the features that determine failure

A hammock looks simple from outside and has several places where it can fail. Each of these is worth asking about because each is cheaply specified and expensive to change.

The net, and whether it is integrated. A fully enclosing mosquito net as seen in the reference product is a different construction from a partial one, and it changes both the fabric area and the assembly time. The question is whether the net is integrated into the body or assembled as a separate piece, how it attaches, and whether the attachment points are reinforced. Reinforcement is the part that matters. A net attached at a dozen points puts load through the fabric at each one, and an unreinforced seam at an attachment point is the most common early failure in this product type.

The spreader bar, and whether it is included. A spreader bar is what allows a hammock to be hung between two trees rather than between two fixed points. It is frequently an optional inclusion rather than a standard one, and that distinction has real consequences for packing volume and carton quantity. For a buyer, a bar that packs flat and folds out is a different shipping proposition from a fixed aluminium bar. Ask whether it is included, what it is made from, and whether it folds. It also affects how a customer uses the product, and therefore how often a hammock without one gets returned.

The straps and the buckle. The reference product ships with tree straps, a quick attachment buckle, and a storage bag, which is a reasonable standard inclusion for this category. The question is what the buckle is rated for and whether the straps are adjustable. Adjustment matters more than it appears. Fixed-length straps limit where a customer can hang the hammock, and a hammock that cannot be hung between two suitable trees is a product that generates returns for reasons the customer did not choose.

Pricing

Bulk pricing: how the tiers actually work

Unit price in this category normally falls in tiers as volume rises, and the tier boundaries are set by the manufacturer rather than negotiated order by order. Two practical consequences follow.

The first is that landing between two tiers is expensive. If the next tier starts at 1,000 pieces and your demand supports 800, you are paying the single-tier price for 800 while 200 more pieces would have halved the unit cost. This is worth calculating before you place the order rather than after you receive the quotation, because it converts a quantity decision into a margin decision.

Ask where the tier boundaries sit before choosing a quantity. Landing just below a tier boundary is one of the most expensive places a wholesale buyer can be.

The second is that the tier interacts with the minimum in ways that are easy to miss. A 500-piece minimum with tiers at 500, 1,000, and 2,000 means the first two steps are close together and the third is far. Buyers who jump straight to the 2,000 tier for unit price reasons sometimes discover that the 1,000 tier gives a better landed cost once freight and duty are accounted for, because a half-empty container has the same freight as a full one.

That last point generalises beyond hammocks. Below a certain volume, freight per unit is fixed by the container rather than by the goods, and the unit price comparison stops being the only comparison that matters.

Sequencing

Sequencing a first order without losing a season

Given the published terms, a workable sequence for a first order looks like this, and it is deliberately conservative.

  1. Fix the specification before asking for anything. Fabric denier, weave, net construction, spreader bar, strap spec, and target colours. Every one of these changes the price and several change the sample.
  2. Ask for the tier structure, not just a quotation. Where do the volume breaks sit, and what is the minimum per colour or size. This determines your order size more than the unit price does.
  3. Order a sample and treat the review as scheduled work. The 7-day sample time is the manufacturer's part. Your part is the review, and it should have a date attached before the sample arrives, not after.
  4. Resolve every deviation in one round. Send back a consolidated list rather than a trickle of individual comments. Each revision cycle costs a sample run and, more importantly, calendar time.
  5. Approve in writing against a specific sample. State the sample identifier and the date. The published 30-day production clock is conditional on the customised sample being confirmed, which makes that written approval the event that starts production.
  6. Fix the shipping point before the goods are finished. Ningbo and Shanghai are both published, and the difference in transit time to your destination affects your delivery promise more than most buyers consider.

The 30-day production clock starts on sample confirmation, so the written approval is the event that actually starts the factory. Treat it as a milestone, not a formality.

The Contrarian Case

Where I would push back on this advice

Most of this article has been about reading published terms carefully, and that is a bias worth naming. I have treated the published MOQ and lead time as figures that need qualifying, and a reasonable buyer might say I have assumed the supplier is being imprecise rather than the specification being complete for their purposes.

That is a fair reading, and the honest position is that I do not know which it is. If the 500-piece minimum does apply per order and the customisation scope simply works within it, then the published terms are clear and my caution is unnecessary. The questions I have recommended are still worth asking, but they are verification rather than correction.

I have treated the published MOQ and lead time as figures needing qualification. If they are already clear, my questions are verification rather than correction — still worth asking, but differently.

There is a second place I would qualify my own position, and it concerns the weight recommendation. I have treated the 500-pound figure as requiring verification because it is published as a recommendation rather than a rating. A manufacturer that has load-tested to an internal standard and knows the result may consider the recommendation adequately precise for a general-market consumer product, and a buyer who pushes for test certificates on every consumer-grade line item will get slower responses from every supplier.

The distinction I would draw is between a product where the weight limit appears in marketing copy and one where it appears on a specification sheet. In the second case, the manufacturer has committed to the number in a way that creates an obligation, and asking what backs it is reasonable. In the first case, it is a descriptive claim and the conversation is not worth having.

Finally, something about the category itself. Camping hammocks are a mature, widely traded product with many competent suppliers and little technical barrier to entry. That is mostly good news for a buyer — it means the comparison is straightforward and the margins are not unusual. It also means there is less reason to expect a supplier to hold a particular specification, so the value of this kind of article is in the questions rather than in identifying a better source.

I would rather say that plainly than imply the sourcing decision is more consequential than it is. For most buyers in this category, the specification work described above is the whole job, and doing it well is sufficient.

Common Questions

Frequently Asked Questions

Q.01What is the MOQ for wholesale camping hammocks?+

The published minimum order quantity is 500 pieces. What matters is whether that figure applies across the whole order or separately to each colour and size, which is the detail most often left unclear in a quotation. A buyer intending three colours at 500 pieces each is ordering 1,500 pieces, not 500.

Q.02How long does it take to produce a bulk hammock order?+

Published production lead time is 30 days after prepayment received, and that time is explicitly based on the customised sample being confirmed. Sampling is published at 7 days after details are confirmed. The practical total is therefore longer than 37 days, because confirmation, shipping of the sample, your review, and any revision sit between the two.

Q.03What materials are camping hammocks made from?+

Most wholesale camping hammocks use nylon or polyester, and the significant variable is denier rather than fibre type. Higher denier means higher tensile strength and higher pack weight, which together drive the price. A hammock described only as nylon cannot be compared against another quotation, because the denier and weave are what actually determine performance.

Q.04Can I customise hammocks with my own logo and colours?+

Yes. Published customisation covers colour, size, pattern, logo, and accessories, which is the standard private-label scope for this product category. The practical constraint is usually not the capability but the MOQ, since each additional colour or size interacts with the minimum order quantity.

Q.05Is the 500 pound weight limit a certification?+

The published figure is stated as a maximum weight recommendation rather than as a certified load rating. The distinction matters when a retailer asks whether the claim has been tested, because a recommendation and a tested rating are different claims and only one of them answers a safety question. Ask whether load testing has been performed and to which standard.

Q.06What is included with a wholesale hammock order?+

Published product imagery for the mosquito net hammock shows the hammock body, tree straps, a quick attachment buckle, and a storage bag. Whether a spreader bar is included is worth confirming, because it changes the packing volume and the carton quantity substantially and is frequently an optional inclusion.

Q.07How does bulk pricing usually work for hammocks?+

Unit price normally falls in tiers as volume rises, and the tier boundaries are set by the manufacturer rather than negotiated per order. The practical consequence is that landing between two tiers is expensive, so it is worth asking where the tier boundaries sit before choosing a quantity rather than after receiving the quotation.

Q.08How long is the production window for a full hammock order?+

Published supply ability is 10,000 pieces per month, so a single 500-piece minimum order consumes a small fraction of one month's capacity. Capacity is therefore rarely the constraint at the order sizes this category typically runs; the constraint is more often colour count, sample approval, and the calendar position relative to your selling season.

Next Step · Written Answer

Send your specification for a quotation.

If you can state the fabric denier and weave, the net construction, whether a spreader bar is included, the strap specification, your colour count, and your target quantity, a quotation becomes a short exchange rather than a series of rounds.

Get in touch View Camping Hammocks

LT

Limin Tao — General Manager

Ningbo Yingmin Imp. & Exp. Co., Ltd. (YMOUTDOOR)

YMOUTDOOR is a manufacturer and trading partner for outdoor camping products, headquartered in Ningbo, Zhejiang Province, working with more than 20 cooperative factories across Zhejiang, Jiangsu, and Shandong. That network lets us match different production bases to different cost and quality positions rather than putting everything through one line, which is why a quotation here is usually a recommendation rather than the only option.

The portfolio spans outdoor chairs, Adirondack chairs, chaise lounges, tents, patio umbrellas, gazebos, hammocks, camping cots, folding wagons, coolers, camping tables, camp kitchen gear, and sleeping bags. The team runs R&D, quality control, sales, and purchasing departments alongside a dedicated VIP group for distributor accounts, and the company has exported to more than 100 countries over more than 20 years.

Pinterest · Facebook · Contact YMOUTDOOR

Last verified: 2026-10-23. Model numbers, seating capacity, maximum weight recommendation, minimum order quantity, supply ability, sample time, delivery time, customisation scope, shipping ports, and place of origin are as published on the YMOUTDOOR camping hammock product pages. Fabric denier, weave, seam strength, spreader bar specification, and load testing status are not published and should be confirmed before ordering; capacity figures describe typical published output and actual scheduling depends on the current order book.